| |
Danfoss Thermostatically Operated Valves
Danfoss thermostatically operated valves are often referred to as the ‘fit and forget’ valves due to their proven reliability, the Danfoss AVTA valve range has many benefits:
-It avoids over-consumption of cooling water, or hot water and steam from heating systems
-It needs no power supply
-It’s insensitive to dirt and water pressure, making it extremely robust
-It’s easy to install
Commonly used in hydraulic power stations (Power Packs), the AVTA valve maintains the oil at a fixed temperature of 50°C. This is essential work, because if the temperature rises above 50°C, the oil will start to break down – making it unfit for use. The Danfoss AVTA valve is also used in the production of microchips. Since the 1980s, billions of chips have been produced – and there are usually about two hundred vacuum pumps in each factory maintaining pressure in the tanks. The AVTA valve helps the pumps stay at the correct temperature (with a variance no greater than +/-2°C). Again, this work is essential – if just one pump fails, the whole batch of chips has to be discarded. Just as the variety of applications has developed over the years, so too has the AVTA valve. It is now available in de-zincification resistant brass, as well as acid-proof stainless steel to cope with aggressive media. It can even be supplied in titanium to order!
The Danfoss AVTA valve range has seen a lot of changes – it’s evolved to suit customer requirements and today is used in numerous hi-tech applications. This very special product is still in its prime, and is likely to remain a customer favourite in the future.
Danfoss AVTA with capillary is a self-acting, thermostatically operated valve for use in cooling applications. The valve is commonly used in connection with hydraulic stations, and is often named the "fit and forget" valve, due to its immense reliability, proven throughout decades.
Danfoss AVTB is self-acting temperature controller used to control the water temperature in hot water tanks, heat exchangers, oil preheaters, etc. Controller closes on rising temperature.
Danfoss BVTS Thermostatic Biomass Valve is designed for protection of biomass boilers, fireplaces and solar systems.
Danfoss FJVA Without capillary is a self-acting, thermostatically operated valve for use in cooling applications. The valve is commonly used in connection with hydraulic stations, and is often named the "fit and forget" valve, due to its immense reliability, proven throughout decades.
Danfoss WVTS Cooling water valves are suitable for controlling the temperature of large flows of water or neutral brine. |
|
